JSV(1) General Commands Manual JSV(1) NAME JSV - Univa Grid Engine Job Submission Verifier DESCRIPTION JSV is an abbreviation for Job Submission Verifier. A JSV is a script or binary that can be used to verify, modify or reject a job during the time of job submission. JSVs will be triggered by submit clients like qsub, qrsh, qsh and qmon on submit hosts (Client JSV) or they verify incoming jobs on the master host (Server JSV) or both. CONFIGURATION JSVs can be configured on various locations. Either a jsv_url can be provided with the -jsv submit parameter during job submission, a corre- sponding switch can be added to one of the sge_request files or a jsv_url can be configured in the global cluster configuration of the Univa Grid Engine installation. All defined JSV instances will be executed in following order: 1) qsub -jsv ... 2) $cwd/.sge_request 3) $HOME/.sge_request 4) $SGE_ROOT/$SGE_CELL/common/sge_request 5) Global configuration The Client JSVs (1-3) can be defined by Univa Grid Engine end users whereas the client JSV defined in the global sge_request file (4) and the server JSV (5) can only be defined by the Univa Grid Engine admin- istrators. Due to the fact that (4) and (5) are defined and configured by Univa Grid Engine administrators and because they are executed as last JSV instances in the sequence of JSV scripts, an administrator has an addi- tional way to define certain policies for a cluster. As soon as one JSV instance rejects a job the whole process of verifi- cation is stopped and the end user will get a corresponding error mes- sage that the submission of the job has failed. If a JSV accepts a job or accepts a job after it applied several modi- fications then the following JSV instance will get the job parameters including all modifications as input for the verification process. This is done as long as either the job is accepted or rejected. Find more information how to use Client JSVs in qsub(1) and for Server JSVs in sge_conf(5) LIFETIME A Client or Server JSV is started as own UNIX process. This process communicates either with a Univa Grid Engine client process or the mas- ter daemon by exchanging commands, job parameters and other data via stdin/stdout channels. Client JSV instances are started by client applications before a job is sent to qmaster. This instance does the job verification for the job to be submitted. After that verification the JSV process is stopped. Server JSV instances are started for each worker thread part of the qmaster process (for version 6.2 of Univa Grid Engine this means that two processes are started). Each of those processes have to verify job parameters for multiple jobs as long as the master is running, the underlying JSV configuration is not changed and no error occurs. TIMEOUT The timeout is a modifiable value that will measure the response time of either the client or server JSV. In the event that the response time of the JSV is longer than timeout value specified, this will result in the JSV being re-started. The server JSV timeout value is specified through the qmaster parameter jsv_timeout. The client JSV timeout value is set through the environment variable SGE_JSV_TIMEOUT. The default value is 10 seconds, and this value must be greater than 0. If the timeout has been reach, the JSV will only try to re-start once, if the timeout is reached again an error will occur. THRESHOLD The threshold value is defined as a qmaster parameter jsv_threshold. This value measures the time for a server job verification. If this time exceeds the defined threshold then additional logging will appear in the master message file at the INFO level. This value is specified in milliseconds and has a default value of 5000. If a value of 0 is defined then this means all jobs will be logged in the message file. PROTOCOL After a JSV script or binary is started it will get commands through its stdin stream and it has to respond with certain commands on the stdout stream. Data which is send via the stderr stream of a JSV instance is ignored. Each command which is send to/by a JSV script has to be terminated by a new line character ('\n') whereas new line char- acters are not allowed in the whole command string itself. In general commands which are exchanged between a JSV and client/qmas- ter have following format. Commands and arguments are case sensitive. Find the EBNF command description below. command := command_name ' ' { argument ' ' } ; A command starts with a command_name followed by a space character and a space separated list of arguments. PROTOCOL (JSV side) Following commands have to be implemented by an JSV script so that it conforms to version 1.0 of the JSV protocol which was first implemented in Univa Grid Engine 6.2u2: begin_command := 'BEGIN' ; After a JSV instance has received all env_commands and param_commands of a job which should be verified, the client/qmaster will trigger the verification process by sending one begin_command. After that it will wait for param_commands and env_commands which are sent back from the JSV instance to modify the job specification. As part of the verification process a JSV script or binary has to use the result_command to indicate that the verification process is finished for a job. env_command := ENV ' ' modifier ' ' name ' ' value ; modifier := 'ADD' | 'MOD' | 'DEL' ; The env_command is an optional command which has only to be implemented by a JSV instance if the send_data_command is sent by this JSV before a the started_command was sent. Only in that case the client or master will use one or multiple env_commands to pass the environment variables (name and value) to the JSV instance which would be exported to the job environment when the job would be started. Client and qmaster will only sent env_com- mands with the modifier 'ADD'. JSV instances modify the set of environment variables by sending back env_commands and by using the modifiers ADD, MOD and DEL. param_command := 'PARAM' ' ' param_parameter ' ' value ; param_parameter := submit_parameter | pseudo_parameter ; The param_command has two additional arguments which are sepa- rated by space characters. The first argument is either a sub- mit_parameter as it is specified in qsub(1) or it is a pseudo_parameters as documented below. The second parameter is the value of the corresponding param_parameter. Multiple param_commands will be sent to a JSV instance after the JSV has sent a started_command. The sum of all param_commands which is sent represents a job specification of that job which should be verified. submit_parameters are for example b (similar to the qsub -b switch) or masterq (similar to qsub -masterq switch). Find a complete list of submit_parameters in the qsub(1) man page. Please note that not in all cases the param_parameter name and the corresponding value format is equivalent with the qsub switch name and its argument format. E.g. the qsub -pe parame- ters will by available as a set of parameters with the name pe_name, pe_min, pe_max or the switch combination -soft -l will be passed to JSV scripts as l_soft parameter. For details con- cerning this differences consult also the qsub(1) man page. start_command := 'START' ; The start_command has no additional arguments. This command indicates that a new job verification should be started. It is the first command which will be sent to JSV script after it has been started and it will initiate each new job verification. A JSV instance might trash cached values which are still stored due to a previous job verification. The application which send the start_command will wait for a started_command before it con- tinues. quit_command := 'QUIT' ; The quit_command has no additional arguments. If this command is sent to a JSV instance then it should terminate itself immedi- ately. PROTOCOL (client/qmaster side) A JSV script or binary can send a set of commands to a client/qmaster process to indicate its state in the communication process, to change the job specification of a job which should be verified and to report messages or errors. Below you can find the commands which are under- stood by the client/qmaster which will implement version 1.0 of the communication protocol which was first implemented in Univa Grid Engine 6.2u2: error_command := 'ERROR' message ; Any time a JSV script encounters an error it might report it to the client/qmaster. If the error happens during a job verifica- tion the job which is currently verified will be rejected. The JSV binary or script will also be restarted before it gets a new verification task. log_command := 'LOG' log_level ; log_level := 'INFO' | 'WARNING' | 'ERROR' log_commands can be used whenever the client or qmaster expects input from a JSV instance. This command can be used in client JSVs to send information to the user submitting the job. In client JSVs all messages, independent of the log_level will be printed to the stdout stream of the used submit client. If a server JSV receives a log_command it will add the received mes- sage to the message file respecting the specified log_level. Please note that message might contain spaces but no new line characters. param_command (find definition above) By sending param_commands a JSV script can change the job speci- fication of the job which should be verified. If a JSV instance later on sends a result_command which indicates that a JSV instance should be accepted with correction then the values pro- vided with these param_commands will be used to modify the job before it is accepted by the Univa Grid Engine system. result_command := 'RESULT' result_type [ message ] ; result_type := 'ACCEPT' | 'CORRECT' | 'REJECT' | 'REJECT_WAIT' ; After the verification of a job is done a JSV script or binary has to send a result_command which indicates what should happen with the job. If the result_type is ACCEPTED the job will be accepted as it was initially submitted by the end user. All param_commands and env_commands which might have been sent before the result_command are ignored in this case. The result_type CORRECT indicates that the job should be accepted after all modifications sent via param_commands and env_commands are applied to the job. REJECT and REJECT_WAIT cause the client or qmaster instance to reject the job. send_data_command := 'SEND' data_name ; data_name := 'ENV'; If a client/qmaster receives a send_env_command from a JSV instance before a started_command is sent, then it will not only pass job parameters with param_commands but also env_commands which provide the JSV with the information which environment variables would be exported to the job environment if the job is accepted and started later on. The job environment is not passed to JSV instances as default because the job environment of the end user might contain data which might be interpreted wrong in the JSV context and might therefore cause errors or security issues. started_command := 'STARTED' ; By sending the started_command a JSV instance indicates that it is ready to receive param_commands and env_commands for a new job verification. It will only receive env_commands if it sends a send_data_command before the started_command. PSEUDO PARAMETERS CLIENT The corresponding value for the CLIENT parameters is either 'qmaster' or the name of a submit client like 'qsub', 'qsh', 'qrsh', 'qlogin' and so on This parameter value can't be changed by JSV instances. It will always be sent as part of a job verification. CMDARGS Number of arguments which will be passed to the job script or command when the job execution is started. It will always be sent as part of a job verification. If no arguments should be passed to the job script or command it will have the value 0. This parameter can be changed by JSV instances. If the value of CMDARGS is bigger than the number of available CMDARG param- eters then the missing parameters will be automatically passed as empty parameters to the job script. CMDNAME Either the path to the script or the command name in case of binary submission. It will always be sent as part of a job ver- ification. CONTEXT Either 'client' if the JSV which receives this param_command was started by a command-line client like qsub, qsh, ... or 'master' if it was started by the sge_qmaster process. It will always be sent as part of a job verification. Changing the value of this parameters is not possible within JSV instances. GROUP Defines Primary group of the user which tries to submit the job which should be verified. This parameter cannot be changed but is always sent as part of the verification process. The user name is passed as parameters with the name USER. JOB_ID Not available in the client context (see CONTEXT). Otherwise it contains the job number of the job which will be submitted to Grid Engine when the verification process is successful. JOB_ID is an optional parameter which can't be changed by JSV instances. USER Username of the user which tries to submit the job which should be verified. Cannot be changed but is always sent as part of the verification process. The group name is passed as parameter with the name GROUP VERSION VERSION will always be sent as part of a job verification process and it will always be the first parameter which is sent. It will contain a version number of the format .. In version 6.2u2 and higher the value will be '1.0'. The value of this parameter can't be changed. SCRIPTSIZE SCRIPTSIZE contains the size of the submitted job script. This parameter cannot be changed but it is always sent as part of the verification process. EXAMPLE Here is an example for the communication of a client with a JSV instance when following job is submitted: > qsub -pe p 3 -hard -l a=1,b=5 -soft -l q=all.q $SGE_ROOT/examples/jobs/sleeper.sh Data in the first column is sent from the client/qmaster to the JSV instance. That data contained in the second column is sent from the JSV script to the client/qmaster. New line characters which terminate each line in the communication protocol are omitted. START SEND ENV STARTED PARAM VERSION 1.0 PARAM CONTEXT client PARAM CLIENT qsub PARAM USER ernst PARAM GROUP staff PARAM CMDNAME /sge_root/examples/jobs/sleeper.sh PARAM CMDARGS 1 PARAM CMDARG0 12 PARAM l_hard a=1,b=5 PARAM l_soft q=all.q PARAM M user@hostname PARAM N Sleeper PARAM o /dev/null PARAM pe_name pe1 PARAM pe_min 3 PARAM pe_max 3 PARAM S /bin/sh BEGIN RESULT STATE ACCEPT SEE ALSO sge_intro(1), qalter(1), qlogin(1), qmake(1), qrsh(1), qsh(1), qsub(1), qtcsh(1), COPYRIGHT See sge_intro(1) for a full statement of rights and permissions. Univa Grid Engine File Formats UGE 8.5.4 JSV(1)